Application Method:

1. When used alone, it should be diluted to the concentration of 0.5%-0.05% (based on solid content).

2. In dealing with different source water or waste water, the dosage is based on the turbidity and the concentration of the water. The most economical dosage is based on the trial. 

3.The dosing spot and the mixing velocity should be carefully decided to guarantee that the chemical can be mixed evenly with the other chemicals in the water and the flocs can not be broken. 

4. it is better to dose the product continuously.

Application Field:

1. The polymer body contains strong cationic group radical and activated-adsorbent group radical which can destabilize and flocculate the suspended solids and the negative-charged water soluble matters in the waste water through electro-neutralization and bridging adsorption. It is very effective in flocculating, decoloring, killing algae and removing organics.

2. The product enjoys small dosage but can cause big flocs, rapid precipitation and low turbidity residue, and it can also produce small amount of sludge. It is adaptable to wide range of pH value, between 4.0 and 10.0.

3. It is smelless, tasteless and harmless. It can be widely used to treat source water and sewage water.

Attention:
The washing tank is must be washed thorough before fixing,for fear of oddment affect fixing effect.
It is favorable to fixing color that raise the fixing color dose and temperature ,but excess could result in color transform.
Setting detailed fixing process should accorading with factory matter of factory and experiment.

Health and Safety:

The product can irritate the eyes and skin. Rubber gloves, goggles and protective clothing are recommended for use while handling. Spilled polymer is slippery and should be flushed with water.