PolyDADMAC is a cationic quaternary ammonium polymer which is completely dissolved in water.It contains strong cationic radical and activated adsorbent radical,which can destabilize and flocculate the suspended solids and the negative-charged water soluble organics in wastewater, which leads to enhanced decolorization, algae removal, and overall organic matter elimination.
1)It is liquid cationic polymers of different molecular weights which work efficiently as primary coagulants and charge neutralization agents in liquid-solid separation processes in a wide variety of industries.
2)It can be used as a primary coagulant for the clarification of potable water and a wide range of industrial effluents.The product is in compliance with NSF 60for drinking water treatment,with coagulation and flocculation up to a maximum concertration of 25ml/L.
3)It can be used as flocculating agent,decoloring agent and dewatering agent for drinking water,raw water and waste water treatment,fungicide for textile printing and dyeing trade,softening agent,antistatic,conditioner and color fixing agent.Moreover,it can also be used as surface active agent i
The product can be continuously and evenly added to the wastewater treatment system after being diluted to any ratio, or diluted 5-20 times, stirred, and settled before direct addition to the wastewater.
Different sources of water and sewage require varying dosages, which should be determined based on turbidity and concentration, with the optimal dosage found through pilot-scale trials.
Careful attention to dosing points and stirring speed is required to mix the material evenly, while minimizing the risk of breaking the flocs.
The product comes in 210kg net plastic drums or 1100kg net IBCs, with the solid version packaged in 20 kg kraft paper bags.
As a common chemical, this product should be kept at room temperature, shielded from direct sunlight, and stored between 5-30°C.
This product has a shelf life of 24 months.
This product can freeze when kept at temperatures below 0°C for prolonged periods. Once thawed and stirred thoroughly, it can be used normally.
The product may cause irritation to the eyes and skin. It is recommended to wear rubber gloves, goggles, and protective clothing when handling it. Spilled polymer can create slippery surfaces and should be immediately rinsed away with water.
Wuxi Lansen Chemicals CO.,LTD is located in Yixing, Jiangsu Province, China (about 200km from Shanghai). We specialize in providing chemicals and service for treatment of industrial waste water and urban sewage.
Our products with strong capacities of decolorization and removal of COD,BOD. They are mainly used for waste water treatment of textile, dyeing, paper-making, printing, mining, ink and so on. In addition, our flocculant agent also can be used as retention agent in the production of paper & pulp.
| Product code |
PD LS 41 |
PD LS 45 |
PD LS 49 |
PD LS 40HV |
PD LS 35 |
PD LS 20 |
PD LS 20HV |
| Appearance |
Colorless to Pale Amber Liquid, Free from Foreign Matter |
| Solid content (120℃,2h) % |
39-41 |
34-36 |
19.0-21.0 |
| Viscosity (25℃) |
1000-3000 |
2500-5000 |
8000-13000 |
150000 |
200-1000 |
100-1000 |
1000-2000 |
| PH |
5.0-8.0 |
Concentration and viscosity of solution can be customized according to customers’ needs.
Your message must be between 20-3,000 characters!
