Place of Origin:
|High molecular weight polymer
|APAM / Anionic Polyacrylamide/ Polyacrylamide Anionic / Anionic Flocculant
|Port of Loading:
|Shanghai Port, China
|Within 10 Working Days After Got Your Payment
|Free to test
|As flocculants for raw water sedimentation, thickening and suspending removal
|Coal washing tailing centrifugal separation
Sedimentation and filtration of coal powder and coal mud.
Highly improve the recovery rate of coal powder and the filtration speed.
|It can preserve water and solidify sand for soil and can play a role of humectant on slope grass planting, tree planting, and sand solidification and dust prevention of soil.
|Productivity: Over 50000mt annual.
|Easily soluble in water; dissolves rapidly.
|Non corrosive of suggested dosage, economical and effective at low levels.
|Can eliminate the use of alum & further ferric salts when used as primary coagulants.
|Reduction in sludge of dewatering process system.
|Faster sedimentation, better flocculation.
|Non-pollution (no aluminum, chlorine, heavy metal ions etc.).
|10 years manufacturing experience, with more than 20 technical engineers
Put a sample of effluent in a beaker and add it as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60rpm. Determine the floc properly at this time and note the sedimentation and clarity of the top solution.
Procedure and precautions upon dispersion and dissolving flocculants:
Dissolving time: The time required to dissolve the flocculant varies according to the type of flocculant, water quality, temperature, and agitation. However, most flocculants generally require around 1 hour of agitation to completely dissolve the powder. The incomplete mixture of flocculant or lumping may inhibit the performance of the flocculant.
Agitation speed: The ideal revolution of the agitator is between 200-400rpm. A high-speed agitator operating without reducing the revolution of a motor is not advised, since it may cut the molecules of the flocculant. An ideal agitator motor should be of 1HP for a 1-2m3 mixing tank.
Dissolving concentration: Flocculants should be standardly be dissolved to 0.1-0.5% concentration. It is also effective to start dissolving at a slightly higher concentration and then dilute the flocculant mixture immediately before use.
Handling measures and precautions:
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves, and boots should be worn while handling and applying chemicals. Splashes on the skin should be washed off with water immediately. In case of splashing into the eyes, flush it with freshwater and obtain medical attention. Should not be injected. Please refer to MSDS for more details.
Send your inquiry directly to us