Place of Origin:
Water decoloring agent is a quaternary cationic polymer which is specialized product for decoloring, flocculating, COD decreasing and other applications.
|Appearance||Colorless or light-color sticky liquid||Light yellow or yellow sticky liquid||Colorless or light-color sticky liquid|
|PH(30% water solution)||2.0-5.0
Concentration and viscosity of solution can be customized according to customers’ needs.
|Appearance:||Colorless or Light-color liquid|
|Specific Gravity at 20°C:||1.1-1.3|
|PH Value (30% water Solution):||2.5-5.0|
|Solubility:||Dissolve in Water absolutely|
|Storage Temperature:||5-30°C ,can not be placed in the sun|
1. The factory has existed for a long time
2. The decolorization rate is 95%
3.They has Strong decolorization (about 85-95%).
4.They remove COD better(about 60%), with faster sedimentation and better flocculation.
5.They are also Non-pollution(no aluminum, chlorine, heavy metal ions etc.)
1. The product shall be diluted with 10-40 times water and then dosed into the waste water directly. After being mixed for several minutes, it can be precipitated or air-floated to become clear water.
2. The pH value of the waste water should be adjusted to 7~8 for better result.
3. When the colority and CODcr are relatively high, it can be used with the help of polyaluminum chloride(PAC), but not mixed together. In this way, the treatment cost can be lower. Whether polyaluminum chloride is used earlier or afterwards depends on the flocculation test and the treatment process.
Package and Storage:
1 It is harmless, non-flammable and non-explosive, it can not be placed in the sun.
2 It is packed in plastic drums with each containing 30kg, 50kg, 250kg , 1000kg, 1250kg IBC tank or others according to your requirements.
3 This product will appear layer after a long-term storage, but the effect will not be affected with stir. Storage temperature: 5-30°C
1. water decoloring agent has good color removal activity and especially to red color, it can treat the wastewater to reach standard.
2. In the practice application,apply with PAC and PAM together, it can get better result and it is more economic.
We have more than 12 years producing experience and our engineer has been in this industry for more than 20 years. We can provide high-quality goods and after-sales and site test service for you.
Provide needed water treatment chemicals
Provide needed technical guidance
Provide site test
Send your inquiry directly to us