|Place of Origin:||CHINA|
|Brand Name:||LANSEN CHEM|
|Model Number:||PD LS 49|
|Minimum Order Quantity:||1 Ton/Tons|
|Packaging Details:||210kgs drums/1100kgs IBC|
|Delivery Time:||5-8 work days|
|Payment Terms:||L/C, D/A, D/P, T/T, MoneyGram|
|Supply Ability:||2000 Ton/Tons per Month|
|Packing:||210kg Net In Plastic Drum||Certifications:||ISO 9001|
fabric dye fixing agent,
polydadmac water treatment
PolyDADMAC is a cationic quaternary ammonium polymer which is completely dissolved in water, it contains strong cationic radical and activated adsorbent radical, which can destabilize and flocculate the suspended solids and the negative-charged water soluble matters in the wastewater through electro-neutralization and bridging adsorption. It achieves good results in flocculating, de-coloring, killing algae and removing organics.
It can be used as flocculating agent, decoloring agent and dewatering agent for drinking water, raw water and waste water treatment, fungicide for textile printing and dyeing trade, softening agent, antistatic, conditioner and color fixing agent. Moreover, it can also be used as surface active agent in chemical industries.
|Appearance||colorless light yellow liquird|
|PH 1% water solution||3.0~6.0|
|Solid content %||40±1%|
|Note: our product can be made upon your special request.|
1. Delite ways:
Add froion water into PDADMAC (accord with rate froion water :PDADMAC =5:3),could use after sufficient mixture homogeneous.
2. Imbue ways:
Time: 10-30min (Ph adjust to 6)
3. Dip and rolling ways :
Dose: 10-25 g/L(PH adjust to 6)
Process: two dip and two rolling drying
When used alone, it should be diluted to the concentration of 0.05%-0.5% (based on solid content).
In dealing with different source water or waste water, the dosage is based on the turbidity and the concentration of the water. The most economical dosage is based on the trial.
The dosing spot and the mixing velocity should be carefully decided to guarantee that the chemical can be mixed evenly with the other chemicals in the water and the flocs can not be broken.
It is better to dose the product continuously.
The polymer body contains strong cationic group radical and activated-adsorbent group radical which can destabilize and flocculate the suspended solids and the negative-charged water soluble matters in the waste water through electro-neutralization and bridging adsorption. It is very effective in flocculating, decoloring, killing algae and removing organics.The product enjoys small dosage but can cause big flocs, rapid precipitation and low turbidity residue, and it can also produce small amount of sludge. It is adaptable to wide range of pH value, between 4.0 and 10.0.It is smelless, tasteless and harmless. It can be widely used to treat source water and sewage water.
Neutralizes anionic trash in papermaking systems to enhance retention aid performance.
Safety, non-toxic and Strong coagulating performance for water purifying.
Improves retention of wet end functional additives including sizing agents dry strength additives, dyes, pigments and fillers.
Fixes wood pitch and synthetic stickies to fibers.
Enhances drainage for energy savings in sheet forming, pressing and drying.
Decreases white water solids to improve raw material yield and saveall efficiency.
Performs over a wide pH range with or without the use of papermakers.
Maintains cationic charge in alkaline, acid and neutral papermaking systems.
Improves paper machine output and runnability for maximum return on investment.
Contains no VOC or surfactant components to harm the environment.
Package and Storage:
1. It is packaged in plastic drums with each containing 50kg and 200kg.
2. Sealed and stored in cool place, avoid solarization
3. This product will appear layer after a long-term storage, but the effect will not be affected with stir.
Contact Person: susan.shi